EN 10028-2 P295GH|P295 GH|EH10028 P295GH STEEL PLATE

EN10028 steel grade supersedes the older BS and DIN standards (Grades BS 1501-161-360A and DIN H 1, respectively).

P295GH steel grade is one of grade in En10028-2, which is non alloy and alloy steels with specified elevated temperature properties. P295GH grades are used above all for manufacturing boilers, pressure vessels and pipes transporting hot liquids.

Supplementary Technology: HIC Test | NACE MR0175 | Z15 | Z25 | Z35 | S1 | S2 | S3 | S4.1
S5 | S6 | S7 | S8 | S9| S11 | S12 | S14 | S17

Thickness: 6mm to 300mm,

Width: 1500mm to 4050mm,

Length: 3000mm to 15000mm
Gnee steel is specialized in supplying EN10028-2 steel plate in grade P295GH. For more information of P295GH steel plates, please check them in following:

P295GH Chemical Composition
Grade	The Element Max (%)
	C	Si	Mn	P	S	Al(min)	N
P295GH	0.08-0.20	0.40	0.80-1.50	0.025	0.015	0.020	0.012
	Cr	Cu	Mo	Nb	Ni	Ti	V
	0.30	0.30	0.08	0.020	0.30	0.03	0.02

Carbon Equivalent: Ceq = 【C+Mn/6+(Cr+Mo+V)/5+(Ni+Cu)/15】%

Grade		P295GH Mechanical Property
	Thickness	Yield	Tensilmie	Elongation	Impact Energy(KV J) min
P295GH	mm	Min Mpa	Mpa	Min %	-20°	0°	+20°
	≤ 16	295	460-580	21	27	34	40
	16> to ≤40	290	460-580	21	27	34	40
	40> to ≤60	285	460-580	21	27	34	40
	60> to ≤100	260	460-580	21	27	34	40
	100> to ≤150	235	440-570	21	27	34	40
	150> to ≤250	220	430-570	21	27	34	40

P295GH steel plate, EN10028 P295GH steel plates is a kind of material for boiler and pressure vessel steel. EN10028 P295GH steel plates is characterised by a minimum yield strength of 220 – 295 MPa and by good weldability,so P295GH steel is mainly used to for manufacturing boilers, pressure vessels and pipes transporting hot liquids.the following are EN10028 P295GH steel plate’s Chemical composition and mechanical properties.

P295GH steel Chemical analysis

Grade	C. %	Mn.%	S.	N	Cu	Nb	Ti.	Si.	P.	AL	Cr.	Mo.	Ni	Vi
P265GH	0.08-0.2	0.90-1.50	0.015	0.012	0.30	0.020	0.03	0.40	0.025	0.020	0.30	0.08	0.30	0.02

P295GH steel Mechanical properties

Grade	Type	Thickness mm	Yield strength Mpa(min)	Tensile Strength MPa	Elongation % (min)	Impact Energy (KVJ) (min)
						-20°	0°	+20
P295GH	Normalized	≤16 16>to≤40 40>to≤60 60>to≤100 100>to≤150 150>to≤250	295	460-580	21	27	34	40
			290	460-580	21	27	34	40
			285	460-580	21	27	34	40
			260	460-580	21	27	34	40
			235	440-570	21	27	34	40
			220	430-570	21	27	34	40

we are P295GH steel suppliers ,we also can supply P235GH steel,P265GH steel,P355GH steel,please contact us to get this.