Hot Rolled Mild Steel Plate Carbon Steel ASTM A516 Grade 70 Pressure Vessel Plates

Hot Rolled Mild Steel Plate Carbon Steel ASTM A516 Grade 70 Pressure Vessel Plates

ASTM A516 Grade 70 is an excellent choice for service in lower than ambient temperature applications, has excellent notch toughness and is used in both pressure vessels and industrial boilers.

A516 Grade 70 offers greater tensile and yield strength when compared to ASTM A516 Grade 65 and can operate in even lower temperature service.

Our plates come with mill certification in accordance with EN10204 3.1 or EN10204 3.2. Our plates are fully traceable, usually with hard stamping and we welcome any third party or customer inspection if required which can be arranged with the client.

 

Table 1: Chemical Composition of ASTM A516 Grade 70

Carbon (C) %
12.5mm or less
12.5 – 50mm
50 – 100mm
100 – 200mm
> 200mm
0.27
0.28
0.30
0.31
0.31
Manganese (Mn) %
12.5mm or less
• Heat Analysis :
• Product Analysis :

Over 12.5mm
• Heat Analysis :
• Product Analysis :

0.85-1.20
0.79-1.30

0.85-1.20
0.79-1.30

Phosphorus (P) %
(max) 0.035
Sulphur (S) %
(max) 0.035
Silicon (Si) %
• Heat Analysis :
• Product Analysis :
0.15-0.40
0.13-0.45

(Maximum values unless stated otherwise)

 

Table 2: Mechanical Properties of ASTM A516 Grade 70

Description Grade 65
Tensile strength (ksi) 70-90
Tensile strength (MPa) 485-620
Yield strength (ksi) 38
Yield strength (MPa) 260
Elongation in 200mm (min)(%) 17
Elongation in 50mm (min) (%) 21
Thickness (max)(mm) 205

(Minimum values unless stated otherwise)

 

(Please note: the technical information above is for guidance only – for exact specifications please check with our Sales Team)

Low Temperature Hot Rolled Mild Steel Plate Carbon Steel ASTM A516 Grade 70 Pressure Vessel Plates

Low Temperature Hot Rolled Mild Steel Plate Carbon Steel ASTM A516 Grade 70 Pressure Vessel Plates

We supply high quality carbon steel plate for boiler and pressure vessel fabrication which is ideally suited to the high standards set by the oil, gas and petrochemical industry – this is why we stock an extensive range of carbon plates according to ASTM A516 Grade 70 and ASME SA516 Grade 70.

The carbon steel plates come with mill certification in accordance with EN10204 3.1 or EN10204 3.2. Our plates are fully traceable, usually with hard stamping and we welcome any third party or customer inspection if required which can be arranged with the client.

Physical Properties Metric English Comments
Density  7.80 g/cc 0.282 lb/in³ Typical of ASTM Steel
Mechanical Properties Metric English Comments
Tensile Strength, Ultimate  485 – 620 MPa 70300 – 89900 psi
Tensile Strength, Yield  260 MPa 37700 psi
Elongation at Break  17 % 17 % in 200mm
21 % 21 % in 50mm
Modulus of Elasticity  200 GPa 29000 ksi Typical Carbon Steel
Bulk Modulus  160 GPa 23200 ksi Typical for Steel
Poissons Ratio  0.29 0.29 Typical Carbon Steel
Shear Modulus  80.0 GPa 11600 ksi Typical for Steel
Electrical Properties Metric English Comments
Electrical Resistivity  0.0000170 ohm-cm 0.0000170 ohm-cm Typical Carbon Steel
Thermal Properties Metric English Comments
CTE, linear  12.0 µm/m-°C 6.67 µin/in-°F Typical Carbon Steel
Specific Heat Capacity  0.470 J/g-°C 0.112 BTU/lb-°F Typical Carbon Steel
Thermal Conductivity  52.0 W/m-K 361 BTU-in/hr-ft²-°F Typical Carbon Steel
Component Elements Properties Metric English Comments
Carbon, C  0.31 % 0.31 % may vary with plate thickness
Iron, Fe  98.315 % 98.315 % as balance
Manganese, Mn  0.85 – 1.2 % 0.85 – 1.2 %
Phosphorous, P  0.035 % 0.035 %
Silicon, Si  0.15 – 0.40 % 0.15 – 0.40 %
Sulfur, S  0.040 % 0.040 %

 

A516 Gr.55-70 Hot Rolled Boiler and Pressure Vessel Steel Sheet for Sale

A516 Gr.55-70 Hot Rolled Boiler and Pressure Vessel Steel Sheet for Sale

A516 is a carbon steel plate grade utilized primarily in welded pressure vessels for moderate to lower temperature service. This material is produced in grades 55, 60, 65 and 70. This material is also offered in the normalized condition where improved notch toughness is required.

We have an extensive stock of ASME/ASTM A516 Boiler Plate. Our focus is in supplying very high quality plates for demanding applications in the oil and gas industry.

Chemical Composition

Steel Grade

C Si Si (Min) Mn Mn (Min) P S

A516 60

0.23 0.45 0.13 1.3 0.79 0.035 0.035

A516 65

0.26 0.45 0.13 1.3 0.79 0.035

0.035

A516 70 0.28 0.45 0.13 1.3 0.79 0.035

0.035

Mechanical Properties Gr 70:
Tensile:
70 to 90 ksi
Yield:
38 ksi min
Elongation:
17% min in 8” 21% min in 2”

Mechanical Properties Gr 65:
Tensile:
65 to 85 ksi
Yield:
35 ksi min
Elongation:
19% min in 8” 23% min in 2”

Mechanical Properties Gr 60:
Tensile:
60 to 80 ksi
Yield:
32 ksi min
Elongation:
21% min in 8” 25% min in 2”

Boiler and pressure vessel steel

ASTM A516-70 Plate As Rolled

ASTM A516-70 Plate As Rolled

ASTM A516 Grade 70 Plate is also called out as ASME SA516-70.  This steel plate grade is a medium carbon alloy that also contains amounts of manganese, phosphorus, sulfur, and silicon. A516 is primarily used for service in welded pressure vessels where improved notch toughness is required. It is typically found in moderate and lower temperature applications. A516 is sometimes called PVQ516.

Supplementary testing such as Charpy Impacts, Ultrasonic Examination and Carbon Equivalency are available. All plates over 1-1/2″ Thick are required to be normalized.  A516 is the most popular Pressure Vessel grade of steel plate in the industry. It is produced in grades 55, 60, 65 or 70.  The most common is Grade 70 or called out A516-70.

 

Chemical Composition

Grade C Mn P S Si
A516 Grade 70 0.27-0.31 0.79 – 1.30 0.035 max 0.035 max 0.13-0.45

 

Properties
Tensile Strength: 70-90 ksi
Yield Strength:    38 ksi

 

Typical Uses
A516-70 plate is a high strength, low alloy steel plate that offers an optimum combination of strength, weldability and notch toughness.

Applications include:
Bridges
Buildings
Automotiveand truck parts
Railroad cars
Cargo containers
Tote boxes
Construction equipment
Structural tubing
Lighting standards
Transmission poles

ASTM A387 GRADE 22 Class 1 PVQ Plates

ASTM A387 GRADE 22 Class 1

We supply plates to global fabricators serving the oil, gas and petrochemical industry. 

These industries require a pressure vessel grade steel which works well in elevated temperatures and our material serves this purpose well. And with good corrosion and oxidation resistance, A387 Grade 22 Class 1 plates are a good option for sour gas environments too. 

 

Equivalents for ASTM A387 Grade 22 Alloy Steel Plates

BS EN ASTM/ASME DIN
622-515B 10 CRMO910 A387-22-1 10 CRMO910

 

Specifications for ASTM A387 Grade 22 Alloy Steel Plates

Chromium & Molybdenum content (according to the ASME specification)

Designation Nominal Chromium
Content (%)
Nominal Molybdenum
Content (%)
A387 Grade 22 2.25% 1.00%

 

Tensile Requirements for ASTM A387 Grade 22 Alloy Steel Plates Class 1 Plates

Designation: Requirement: Grade 22
A387 Grade 22 Tensile strength, ksi [MPA] 75 to 100 [515 to 690]
Yield strength, min, ksi [MPa]/(0.2% offset) 45 [310]
Elongation in 8 in. [200mm], min %
Elongation in 2 in. [50mm], min, % 18
Reduction of area, min % 45 (measured on round specimen)
40 (measured on flat specimen)

 

Chemical Requirements for ASTM A387 Grade 22 Alloy Steel Plates

Element Chemical Composition (%)
A387 Grade 22
Carbon: Heat Analysis: 0.05 – 0.15
Product Analysis: 0.04 – 0.15
Manganese: Heat Analysis: 0.30 – 0.60
Product Analysis: 0.25 – 0.66
Phosphorus: Heat Analysis: 0.035
Product Analysis: 0.035
Sulphur (max): Heat Analysis: 0.035
Product Analysis: 0.035
Silicon: Heat Analysis: 0.50 max
Product Analysis: 0.50 max
Chromium: Heat Analysis: 2.00 – 2.50
Product Analysis: 1.88 – 2.62
Molybdenum: Heat Analysis: 0.90 – 1.10
Product Analysis: 0.85 – 1.15

ASME SA387 and ASTM A387 Chrome Moly Plate for Boiler

ASME SA387 and ASTM A387 Chrome Moly Plate for Boiler

Most commonly used steel specifications for Chrome Moly plate are ASME SA387 and ASTM A387

  • Chemical and mechanical properties of the ASME and ASTM specifications are the same.
  • Brown McFarlane supplies Chrome Moly plates to ASME SA387 and ASTM A387 both from stock and, where required by the customer, cut to size and shape.
  • SA387 and A387 are described as a “Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum.

 

Chemical Requirements

GR. 2 GR. 12 GR. 11 GR. 22 GR. 22L GR. 21 GR. 21L GR. 5 GR. 9 GR. 91*
C 0.05-0.21 0.05-0.17 0.05-0.17 0.05-0.15 0.10 0.05-0.15 0.10 0.15 0.15 0.08-0.12
Mn 0.55-0.80 0.40-0.65 0.40-0.65 0.30-0.60 0.30-0.60 0.30-0.60 0.30-0.60 0.30-0.60 0.30-0.60 0.30-0.60
P 0.025 0.025 0.025 0.025 0.025 0.025 0.025 0.025 0.025 0.020
S 0.025 0.025 0.025 0.025 0.025 0.025 0.025 0.025 0.025 0.010
Si 0.15-0.40 0.15-0.40 0.50-0.80 0.50 0.50 0.50 0.50 0.50 1.00 0.20-0.50
Cr 0.50-0.80 0.80-1.15 1.00-1.50 2.00-2.50 2.00-2.50 2.75-3.25 2.75-3.25 4.00-6.00 8.00-10.00 8.00-9.50
Mo 0.45-0.60 0.45-0.60 0.45-0.65 0.90-1.10 0.90-1.10 0.90-1.10 0.90-1.10 0.45-0.65 0.90-1.10 0.85-1.05
V 0.04 0.18-0.25

 

Tensile Requirements

Class 1 Plates

GRADE TENSILE (MPA) YIELD (MPA) ELONG. (50MM) REDUC’N OF AREA*
2, 12 380 – 550 230 min 22% min
11 415 – 585 240 min 22% min
22, 21, 5, 9 415 – 585 205 min 18% min 40% min
21L, 22L 415 – 585 205 min 18% min 40% min

Class 2 Plates

GRADE TENSILE (MPA) YIELD (MPA) ELONG. (50 MM) REDUC’N OF AREA*
2 485 – 620 310 min 22% min
11 515 – 690 310 min 22% min
12 450 – 585 275 min 22% min
22, 21, 5, 9 515 – 690 310 min 18% min 40% min
91 585 – 760 415 min 18% min
Alloy steel plate

Alloy steel plate

Item: Alloy steel plate, alloy steel sheet, alloy plate, alloy sheet, Hot rolled/Cold rolled alloy steel plate
Material: A387 Gr. 1, GR. 5, gR. 9, Gr. 11, Gr. 12, Gr. 22, Gr. 91
Thickness: 0.3-500mm
Width: 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2200mm, 2500mm, etc
Length: 2000mm, 2438mm, 3000mm, 6000mm, 8000mm, 10000mm, 12000mm, etc
Surface: Black painted, PE coated, Galvanized, colour coated, etc
Export to: Iran, India, Dubai, Peru, Saudi Arabia, Indonesia, Singapore, Korea, Viet Nam, Thailand, Brazil, Ukraine, England, USA, Canada, South Korea, South Africa, etc
Our Alloy steel plates has best quality with low cost and short delivery, welcome to contact us for more details.

Item Alloy steel plate, alloy steel sheet, alloy plate, alloy sheet
Standard ASTM A285, ASTM A283, SA516, SA517, EN10025-2-2004, ASTM A572, ASTM A529,
ASTM A573, ASTM A633, JIS G3101-2004, ASTM A678 ASTM A588, ASTM A242,etc
Material ASTM A283, Gr. C, A285 Gr. C, A36, ST52-3, SA516 Gr.50,Gr. 60, 70, GR. 65, Q345B,
X60, X70, ST52-3,SA387 Gr.1,GR.2,GR.5,GR.9,GR.11,GR.22,GR.12,GR.91,GR.92,etc
Thickness 0.3-500mm
Width 1-5500mm
Length 2m,6m,12m,or as required
Surface Mill,varnished,Galvanized,checkered,pre painted,color coated ,etc
Export to Iran,India,Canada,USA,Spain,Korea,Thailand,Ukraine,Spain,Peru,Malaysia,Brazil,
Saudi Arabia,South Korea,Italy,Egypt,Russia,Chile,etc
Application Alloy Steel plates are widely used as boiler plate, container plate, flange plate and
ship plate, and also widely used in building construction. The size of steel plate
can be made according to clients requirements.
Contact If you have any question ,please feel free to contact me .