ASTM A387 Plates

ASTM A387 Plates

ASTM A387 Plates

Most commonly used steel specifications for Chrome Moly plate are ASME SA387 and ASTM A387

Chemical and mechanical properties of the ASME and ASTM specifications are the same.

Gnee steel supplies Chrome Moly plates to ASME SA387 and ASTM A387 both from stock and, where required by the customer, cut to size and shape. SA387 and A387 are described as a “Standard Specification for Pressure Vessel Plates, Alloy Steel, and Chromium-Molybdenum.

Chrome Moly Plate
ASME SA / ASTM A387 Gr 11 Cl. 2, ASME SA / ASTM A387 Gr 22 Cl. 2, ASME SA / ASTM A387 Gr 5 Cl. 2, ASME SA / ASTM A387 Gr 9 Cl. 2.

Each grade except Grades 21L, 22L, and 91 is available in two classes of tensile strength described as Class 1 and Class 2.

The most regularly specified grades and hence those that are most readily available from stock are Grades 12, 11, 22, 5, 91 and 9 and in most case stock plates will be produced to the tensile requirements of Class 2.

As with all ASME and ASTM pressure vessel steels, Chrome Moly to SA387 and A387 is produced in conformity to SA20 / A20 which outlines the testing and retesting methods and procedures, permissible variations in dimensions and weight, quality and repair of defects, marking, loading, and ordering information.

GRADE NOMINAL CR CONTENT (%) NOMINAL MO CONTENT (%)
2 0.50 0.50
12 1.00 0.50
11 1.25 0.50
22, 22L 2.25 1.00
21, 21L 3.00 1.00
5 5.00 0.50
9, 91 9.00 1.00

Chemical Requirements

GR. 2 GR. 12 GR. 11 GR. 22 GR. 22L GR. 21 GR. 21L GR. 5 GR. 9 GR. 91*
C 0.05-0.21 0.05-0.17 0.05-0.17 0.05-0.15 0.10 0.05-0.15 0.10 0.15 0.15 0.08-0.12
Mn 0.55-0.80 0.40-0.65 0.40-0.65 0.30-0.60 0.30-0.60 0.30-0.60 0.30-0.60 0.30-0.60 0.30-0.60 0.30-0.60
P 0.025 0.025 0.025 0.025 0.025 0.025 0.025 0.025 0.025 0.020
S 0.025 0.025 0.025 0.025 0.025 0.025 0.025 0.025 0.025 0.010
Si 0.15-0.40 0.15-0.40 0.50-0.80 0.50 0.50 0.50 0.50 0.50 1.00 0.20-0.50
Cr 0.50-0.80 0.80-1.15 1.00-1.50 2.00-2.50 2.00-2.50 2.75-3.25 2.75-3.25 4.00-6.00 8.00-10.00 8.00-9.50
Mo 0.45-0.60 0.45-0.60 0.45-0.65 0.90-1.10 0.90-1.10 0.90-1.10 0.90-1.10 0.45-0.65 0.90-1.10 0.85-1.05
V 0.04 0.18-0.25

Tensile Requirements For Class 1 Plates

GRADE TENSILE (MPA) YIELD (MPA) ELONG. (50MM) REDUC’N OF AREA*
2, 12 380 – 550 230 min 22% min
11 415 – 585 240 min 22% min
22, 21, 5, 9 415 – 585 205 min 18% min 40% min
21L, 22L 415 – 585 205 min 18% min 40% min

Tensile Requirements For Class 2 Plates

GRADE TENSILE (MPA) YIELD (MPA) ELONG. (50 MM) REDUC’N OF AREA*
2 485 – 620 310 min 22% min
11 515 – 690 310 min 22% min
12 450 – 585 275 min 22% min
22, 21, 5, 9 515 – 690 310 min 18% min 40% min
91 585 – 760 415 min 18% min

发表评论

电子邮件地址不会被公开。 必填项已用*标注