P460 NL2 High Yield Boiler Steel Plate

Posted by admin on with 0 Comment

P460 NL2 steel plate is one of the mainly High Yield steel, Boiler steel plates P460NL2 tensile strength is at 570_720 Mpa for thickness belows 60mm,even maximum 730 Mpa is OK for the product thicknesses up to 16 millimeters, P 460NL2 Chemical composition cast analysis.

We stock P460NH, P460NL1, and P460NL2. P460NH, so called for having a minimum yield strength of 460 MPa, is a high quality pressure vessel steel grade for use in boiler and pressure vessel fabrication. It is a normalised fine grain steel with good weldability characteristics.

 

Other grade types include…

NL1 – is ideal for use in low temperatures

NL2 – is ideal for use in especially low temperatures

 

Chemical Properties Of P460 NL2 Steel Plate

Element P460NL2 Element P460NL2
Carbon (C)
max.		 0.20 Silicon (Si)
max.		 0.60
Manganese (Mn) 1.10 to 1.70 Phosphorous (P)
max.		 0.020
Sulphur (S)
max.		 0.010 Chromium (Cr)
min.		 0.30
Molybdenum (Mo)
max.		 0.10 Nickel (Ni)
max.		 0.80
Niobium (Nb)
max.		 0.05 Titanium (Ti)
max.		 0.03
Vanadium (V)
max.		 0.20 Nitrogen (N)
max.		 0.025
Aluminium (Al)
max.		 0.020 Copper (Cu)
max.		 0.70

 

Mechanical Properties Of P460 NL2 Steel Plate

Grade Type Thickness
(mm)		 Yield Strength
MPa (min)		 Tensile Strength
MPa		 Elongation
% (min)
P460 NL2 Normalized ≤ 16
16> to ≤40
40> to ≤60
60> to ≤100
100> to ≤150		 460
445
430
400
–		 570 to 750
570 to 720
570 to 720
540 to 710
–		 17
17
17
17
17

 

EN 10028 P460 NL1 PVQ Steel Plate

Posted by admin on with 0 Comment

The designation EN 10028:3 P460NL1 shows that this is steel for pressure purposes (P) with minimum yield strength of 460 MPa (460) which is impact tested in the transverse direction at -40 deg C (NL1).

EN 10028 P460 NL1 steel plate, Europe standard P460 NL1 steel plate, under Europe standard standard, we can regard P460 NL1 steel plate as High Yield steel plate. P460 NL1 steel plate is one of the mainly High Yield steel, Boiler steel plates P460NL1 tensile strength is at 570_720 Mpa for thickness belows 60mm,even maximum 730 Mpa is OK for the product thicknesses up to 16 millimeters.

 

Chemical Properties Of P460 NL1 Steel Plate

Element P460NL1
Carbon (C) max. 0.20
Manganese (Mn) 1.10 to 1.70
Sulphur (S) max. 0.015
Molybdenum (Mo) max. 0.10
Niobium (Nb) max. 0.05
Vanadium (V) max. 0.20
Aluminium (Al) max. 0.020
Silicon (Si) max. 0.60
Phosphorous (P) max. 0.025
Chromium (Cr) min. 0.30
Nickel (Ni) max. 0.80
Titanium (Ti) max. 0.03
Nitrogen (N) max. 0.025
Copper (Cu) max. 0.70

 

Mechanical Properties Of P460 NL1 Steel Plate

Grade Type Thickness

(mm)

 Yield Strength

MPa (min)

 Tensile Strength

MPa

 Elongation

% (min)
P460 NL1 Normalized ≤ 16

16> to ≤40

40> to ≤60

60> to ≤100

100> to ≤150

 460

445

430

400

–

 570 to 750

570 to 720

570 to 720

540 to 710

–

 17

17

17

17

17

 

ASME SA537 Class 2 Pressure Vessel Steel Plate for Pressurised Tanks

Posted by admin on with 0 Comment

ASME SA537 Class 2 steel – a pressure vessel grade steel which is an alloy of carbon, manganese and silicon. The steel is used extensively in the fabrication and manufacture of pressurised tanks, boilers and heat exchangers.

Heat treated using the quenched and tempered method, the material has higher residual tensile and yield strength when compared to pressure vessel grades produced under the ASME SA516 standard. ASME SA537 Class 2 is used extensively by the oil, gas and petrochemical industry.

 

Chemical Properties Of A537 Class 2 Steel Plate

Grade C Si Mn P S Cr Mo Ni Cu
≤ 40 mm > 40 mm
SA537 Class 2 0.24 0.15/0.50 0.70/1.35 1.00/1.60 0.035 0.035 0.25 0.80 0.25 0.35

 

Mechanical Properties Of A537 Class 2 Steel Plate

Grade Yield (MPa) Tensile (MPa) Elongation Thickness
A50mm A200mm
SA537 Class 2 415 550/690 22% – ≤ 65
380 515/655 22% – > 65 ≤ 100
315 485/620 20% – > 100 ≤ 150

 

SA537 Class 1 Steel Plate with ASME Standard

Posted by admin on with 0 Comment

ASME SA537 Class 1 carbon steel plates are produced for use in pressurised service and are commonly used in the fabrication of industrial pressurised vessels and boilers.

Class 1 plates are provided in normalised condition and are heat treated – as a result, the material displays greater yield and tensile strength than the more standard ASTM A516 grades. GNEE supplies ASME SA537 Class 1 plates to the world’s leading fabricators serving the Oil, Gas and Petrochemical industry. The material is used in a variety of applications including pressurised tanks and heat exchangers.

 

A537 Class 1 Steel Plate Grade and Specification

Grade A516 Gr.60, Gr.65, Gr.70,P235GH, P265GH, P295GH, P355NH, P275NH, P355NL1, P355N, A537 Plates, A537 Cl.1, A537 Cl.2
Size Thickness: 8-100mm,

Width: 1500-3500mm

Length: 3000-18000mm
Export To Saudi arabia, Kuwait, Qatar, Oman, Yemen, UAE, Iran, Turkey, Kazakhstan, Greece, Singapore, Thailand, Indonesia, Vietnam, South Africa, South America, Brazil, India, Australia, Egypt.

 

Chemical Properties Of A537 Class 1 Steel Plate

 Element  Thickness  Composition (%)  Note
 Carbon (max)    0.24 A, B
 Manganese  40 mm and under  0.70 – 1.35 A, C
   40 mm and under  0.64 – 1.46 B, C
   Over 40 mm  1.00 – 1.60 A, C
   Over 40 mm  0.92 – 1.72 B, C
 Phosphorus (max)    0.035 A, B
 Sulphur (max)    0.035 A, B
 Silicon    0.15 – 0.50 A
     0.13 – 0.55 B
 Copper (max)    0.35 A
     0.38 B
 Nickel (max)    0.25 A, C
     0.28 B, C
 Chromium (max)    0.25 A
     0.29 B
 Molybdenum (max)    0.08 A
     0.09 B

 

Mechanical Properties Of A537 Class 1 Steel Plate

Mechanical Property  Value
Tensile Strength, MPa (ksi) 485 – 620 (70 – 90)
Yield Strength, min MPa (ksi) 345 (50)
Elongation min, % 200 mm (8 in) 18
Elongation min, % 50 mm (2 in) 22

 

ASTM Standard A516 Grade 70 Steel Plate

Posted by admin on with 0 Comment

ASTM A516 Grade 70 is an excellent choice for service in lower than ambient temperature applications, has excellent notch toughness and is used in both pressure vessels and industrial boilers.

A516 Grade 70 offers greater tensile and yield strength when compared to ASTM A516 Grade 65 and can operate in even lower temperature service. Our plates are fully traceable, usually with hard stamping and we welcome any third party or customer inspection if required which can be arranged with the client.

 

Chemical Properties Of A516 Grade 70 Steel Plate

Carbon (C) % Manganese (Mn) %
12.5mm or less
12.5 – 50mm
50 – 100mm
100 – 200mm
> 200mm		 0.27
0.28
0.30
0.31
0.31		 12.5mm or less
• Heat Analysis :
• Product Analysis :
Over 12.5mm
• Heat Analysis :
• Product Analysis :		 0.85-1.20
0.79-1.300.85-1.20
0.79-1.30
Sulphur (S) % Silicon (Si) %
(max) 0.035 • Heat Analysis :
• Product Analysis :		 0.15-0.40
0.13-0.45
Phosphorus (P) %
(max) 0.035

 

Mechanical Properties Of A516 Grade 70 Steel Plate

Description Grade 70
Tensile strength (ksi)

Tensile strength (MPa)

Yield strength (ksi)

Yield strength (MPa)

Elongation in 200mm (min)(%)

Elongation in 50mm (min) (%)

Thickness (max)(mm)

 70-90

485-620

38

260

17

21

205

 

A516 Grade 65 Boiler Quality Steel Plate

Posted by admin on with 0 Comment

What is A516 Grade 65 Steel Plate ?

ASTM A516 Grade 65 is an excellent weldable carbon steel choice for pressure vessels and boiler fabrication. The material offers excellent performance in lower than ambient temperature service, has good weldability and excellent notch toughness.

A516 Grade 65 has greater specified tensile and yield strength when compared with ASTM A516 Grade 60.

Used throughout the oil, gas and petrochemical industry, the steel is also found in sour service and wet H2S applications (where the steel is HIC tested).

 

Chemical Properties Of A516 Grade 65 Steel Plate

Carbon (C) %
12.5mm or less12.5 – 50mm

50 – 100mm

100 – 200mm

> 200mm

 0.240.26

0.28

0.29

0.29
Sulphur (S) %
(max) 0.035
Manganese (Mn) %
12.5mm or less

• Heat Analysis :

• Product Analysis : 

Over 12.5mm

• Heat Analysis :

• Product Analysis :

  

0.85-1.20

0.79-1.30

 

0.85-1.20

0.79-1.30
Silicon (Si) %
• Heat Analysis :

• Product Analysis :

 0.15-0.40

0.13-0.45
Phosphorus (P) %
(max) 0.035

 

Mechanical Properties Of A516 Grade 65 Steel Plate

Description Grade 70
Tensile strength (ksi)

Tensile strength (MPa)

Yield strength (ksi)

Yield strength (MPa)

Elongation in 200mm (min)(%)

Elongation in 50mm (min) (%)

Thickness (max)(mm)

 65-85

450-585

35

240

19

21

205

 

A515 Steel Plate for Boiler Pressure Vessel

Posted by admin on with 0 Comment

What is A515 Steel Plate ?

This specification covers carbon-silicon steel plates primarily for intermediate- and higher-temperature service in welded boilers and other pressure vessels. Plates are available in three grades having different strength levels: Grade 60; Grade 65; and Grade 70. The steel shall be killed and made to a coarse austenitic grain size practice.

Chemical Properties Of A515 Steel Plate

  C   P max S max Si max
  t < 12.5mm 12.5mm < t ≤ 50mm 50mm <  t≤ 100mm 100mm < t≤ 200mm t > 200mm Mn

max
A515

Grade 60

 0.24 0.27 0.29 0.31 0.31 0.90 0.035 0.035 0.15-0.4
A515

Grade 65

 0.28 0.31 0.33 0.33 0.33 0.90 0.035 0.035 0.15-0.4
A515

Grade 70

 0.31 0.33 0.35 0.35 0.35 1.20 0.035 0.035 0.15-0.4

 

Mechanical Properties Of A515 Steel Plate

  Tensile Strength

(KSI)

 Tensile Strength

(MPa)

 Yield Strength

(KSI)

 Yield Strength

(MPa)

 Elongation in 200mm (%) Elongation in 50 (%)
A515

Grade 60

 60-80 415-550 32 220 21 25
A515

Grade 65

 65-85 450-585 35 240 19 23
A515

Grade 70

 70-90 485-620 38 260 17 21

 

P690QH Steel Sheet Pressure Vessel Steel plate

Posted by admin on with 0 Comment

P690QH Steel Sheet Pressure Vessel Steel plate

 

Steel Name: P690QH Boiler steel plate

Main Application: P690QH Pressure Vessel And Boiler Steel Sheet are used in Pressure Vessel, Boiler, Storage Tanks and Heat Exchanger in Oil, Gas Project.

Steel Standard: EN10028-6

Rolling Size: Thickness*Width*Length 5-200mm*1220-4200mm*5000-18000mm

 

Notes:

1.Payment Item: T/T,L/C

2.Trade Terms:CIF,FOB,CFR,CNF

3.Delivery Time: 10-30days 

4.Heat Treatment: AR,TMCP,N,Q+T,

5:Steel Services: UT ,Charpy V-Notch Impact Test,HIC test, NDT , PWHT,NACE0175 ,The Third Party Test (Such as SGS Test),Cutting, Coated or Shot Blasting and Painting,Z Direction Test.

Pressure vessel steel plate SPV315,SPV355,SPV490,SL2N;15MnNbR,15MnVNR 16MnDR,09MnNiDR

Posted by admin on with 0 Comment

1. Grade:  20g,16Mng,15CrMog
12Cr1MoVg,19Mng
22Mng,13MnNiCrMoNbg
20R,16MnR,
15MnVR,15CrMoR,
13MnNiMoNbR
15MnNbR,15MnVNR
16MnDR,09MnNiDR
15MnNiDR,12Cr2Mo1R

2. Adopting standards:  
GB713
GB6645
GB3531
GB150
JIS G3103
JIS G3115
JIS G3118
JIS G3119
JIS G3124
DIN17155
ASTM,
ASME
EN10028-2
NFA36-205
BS1501

3.  Specifications(T*W*L): 8–500mm * 1500–4020mm *  3000–18000 mm

4.  Payment item: T/T,L/C

5.  Trading item: FOB, CIF, CFR , CNF

6.  Delivery time: 20–60 days

15CrMoR Pressure Vessel Steel Plate

Posted by admin on with 0 Comment
Advantages of 15CrMoR:
 
1. Pure steel material. P: 0.010%, S: 0.005%, N: 70ppm, O:15ppm, H:2ppm.
 
2. Good toughness and weldability.
 
3. Leading technology of heat treatment: According to the requirements, normalizing, quenching, tempering, 
quenching and tempering and other heat treatment will be added.
 
4. It can significantly improve the plasticity and impact toughness as well as anisotropy of steel.
 
5. The thickness of rolling: 8mm—300mm, width:1600mm—4000mm, length: 4000mm—18500mm,
 
6. The requirements of detection testing with grade 1, 2, 3 and the performance of Z direction, Z15,Z25,Z35 can be available.
 
Notes:
 
1. Standard: 
 
GB, ASTM, ASME, JIS, DIN, BS, EN, ISO and relative standards are available for the clients’ requirements.
 
2. The performance of Z15,Z25, Z35 are available for various grades 
 
3. US Tests: 
 
JB4730, GB/T2970, A435, A577, A588, JISG0801, JISG0901, SEL072, BS5996, NFS04-305 are supplemented by all testing means & devices
4. Productis Specifications:
Thickness:8mm-650mm,
width:1500mm-4800mm,
Length:3000mm-27000mm. 
In view of clinets’different requirements, we can supply more steel plates with various specifications.
 
5. Delivery States
Heat treatment facilities for hot-rolled, controlled rolling, normalizing, annealing, tempering,quenching, normalizing plus tempering, quenching and tempering and other delivery states are available for clients’requirements.
 
6. Tests
HIC, SSC, SPWHT,Macrostructure, detection of defects, and Hardness as well as DWTT test for pipelines steel plates are also available for clients.
 
7. Payment Terms: T/T, L/C at sight.
 
8. Trading Terms: FOB, CIF, CFR, CNF
 
9. Delivery Time: 20-40 days
 
We will provide our customers more competitive prices, high quality products, the fastest delivery and sincere service. And we are looking forward to have more opportunities to cooperate with customers.