A516 Pressure Vessel Steel Plate

A516 Pressure Vessel Steel Plate

Plate
Thickness:6mm-400mm
Width:50mm-4020mm
Length:50mm-18000mm

Coil
Thickness:1.2mm-19mm
Width:50mm-2000mm
Length:Can’t less than 50mm

♦ Application of Boiler & Pressure Vessel Steel Plate
Widely used in petroleum, chemical industry, power plants, boilers and other fields,such as to produce reactors, heat exchangers, separators, spherical tank, oil tank, LPG tanks, nuclear reactor pressure shell,boiler drum, liquefied petroleum gas cylinders, hydropower high-pressure pipes, Turbine vortex shells and other equipment and components, etc.

Steel Grade
Executive Standard
20g,16Mng,15CrMog 12CrlMoVg,19Mng 22Mng,13MnNiCrMoNbg
GB713-97
20R,16MnR,15MnVR 15CrMoR,13MnNiMoNbR 15MnNbR,15MnVNR
GB6654-96
16MnDR,09MnNiDR,15MnNiDR
GB3531
12Cr2Mo1R,14Cr1MoR 07MnCrMoVR,07MnNiCrMoVDR
GB150
SB410,SB450,SB480
JIS G 3103
SPV235,SPV315,SPV355 SPV410,SPV450,SPV490
JIS G 3115
SGV410,SGV450,SGV480
JIS G 3118
SBV1A,SBV1B,SBV2,SBV3
JIS G 3119
SEV245,SEV295,SEV345
JIS G 3124
HI,HII,10CrMo910,15Mo3 13CrMo44,19Mn6
DIN17155
BHW35
Thyssen
13MnNiMo54
Dillingen
1Cr0.5Mo,2.25Cr1Mo 1.25Cr0.5Mo
special purpose & condition
(S)A299M
(S)A515M(Gr.60,65,70)
(S)A516M(Gr.55,60,65,70)
(S)A204M(Gr.A,B,C)
(S)A387M(Gr.11,12,22)
(S)A537M(CL.1,CL.2)
(S)A662M(Gr.A,B,C)
(S)A302M(Gr.A,B,C,D)
(S)A737M(Gr.B,C)
(S)A738M(Gr.A,B,C)
(S)A533M(I,II)
ASTM、ASME
P235GH,P265GH,P295GH
P355GH,16Mo3,13CrMo4-5
10CrMo9-10,11CrMo9-10
EN10028-2
A42,A52,A48
NF A36-205
20MnHR,20HR,16MnHR
special purpose & condition
161G430
BS1501

Steel Plate ASTM A516/A516M

Steel Plate ASTM A516/A516M

ASTM A516 Grade 70(A516GR70)
Grade Chemical Composition(%)
C Mn≥ Si P S
ASTM A516 Grade 70(A516GR70) 0.27-0.31 0.79-1.3 0.13-0.45 0.035 0.035
Grade Mechanical Property
Tensile Strength(MPa) Yield Strength(MPa) % Elongation in 2 in.(50mm) min Impacting Test  Temperature(°C)
ASTM A516 Grade 70(A516GR70) 485-620 260 17 -20,40,-60
ASTM A516 Grade 65(A516GR65)
Grade Chemical Composition(%)
C Mn≥ Si P S
ASTM A516 Grade 65(A516GR65) 0.24-0.29 0.79-1.3 0.13-0.45 0.035 0.035
Grade Mechanical Property
Tensile Strength(MPa) Yield Strength(MPa) % Elongation in 2 in.(50mm) min Impacting Test  Temperature(°C)
ASTM A516 Grade 65(A516GR65) 450-585 240 19 -20,40,-60
ASTM A516 Grade 60(A516GR60)
Grade Chemical Composition(%)
C Mn≥ Si P S
ASTM A516 Grade 60(A516GR60) 0.21-0.27 0.13-0.45 0.79-1.30 0.035 0.035
Grade Mechanical Property
Tensile Strength(MPa) Yield Strength(MPa) % Elongation in 2 in.(50mm) min Impacting Test  Temperature(°C)
ASTM A516 Grade 60(A516GR60) 415-550 220 21 -20,40,-60
ASTM A516 Grade 55(A516GR55)
Grade Chemical Composition(%)
C Mn≥ Si P S
ASTM A516 Grade 55(A516GR55) 0.18-0.26 0.55-1.3 0.13-0.45 0.035 0.035
Grade Mechanical Property
Tensile Strength(MPa) Yield Strength(MPa) % Elongation in 2 in.(50mm) min Impacting Test  Temperature(°C)
ASTM A516 Grade 55(A516GR55) 380-515 205 23 -20,40,-60

ASTM A516/ A516M Grade 65 Pressure Vessel Steel Plate

Gnee Steel can supply A516 Grade 65/ A516 Gr65 pressure vessel steel plate, mainly used in construction for pressure vessels.

Production Size: Thickness: 4mm- 400mm; Width: 1000mm- 4000mm; Length: 4000mm- 12000mm.

Production ability:10000 Tons Per Month.

Production Way: Hot Rolled

Techanical Details:

Heat Treatment: Normalized, Quenched, Tempered, HIC, Impact Test,..( Optional if not provided in rules)

ASTM A516 gr 55 Carbon Steel Plate

ASTM A516 gr 55 Carbon Steel Plate Introduction

In order to provide the best possible service to our customers, Gnee Steel stocks ASTM A516 Gr. 70 and ASME SA516 Gr. 70 plates with numerous supplementary requirements included and all noted on the material test certificate supplied with each plate.

ASTM A516 is also known as ASME SA516. The A516 / SA516 standard, its full name is “standard specification for pressure vessel plates, carbon steel, for moderate- and lower-temperature service”, could almost be described as the default material specification for pressure vessel applications particularly outside of Europe and it is widely used by designers and engineers in many market sectors. A grade intended primarily for service in welded pressure vessels where improved notch toughness is required, and is normally found in moderate and lower temperature applications. All plates over 1-1/2″ Thick are required to be normalized.  A516 is the most popular pressure vessel grade of steel plate in the industry.

This specification of ASTM A516 covers carbon steel plates intended primarily for service in welded pressure vessels where improved notch toughness is important. According to different strength levels, the plates are available in four grades: Grades 55, 60, 65, and 70. The most common is Grade 70 or called out A516-70. The maximum thickness of plates is limited only by the capacity of the composition to meet the specified mechanical property requirements. The steel shall be killed and shall conform to fine austenitic grain size requirements. The mechanical properties such as tensile strength, yield strength, and elongation shall be determined by a tension test for the plates.

ASTM A516 GR.55-70 Chemical Composition:
Chemical Composition Maximum C % for thickness t (mm) Mn % for
thickness t (mm)
Si % P % max S % max
6-12.5mm 12.5-25mm 25-50mm >50mm ≤12.5mm >12.5mm
A516 Gr55 0.18 0.20 0.22 0.25 0.55-0.98 0.60-1.30 0.13-0.45 0.035 0.035
A516 Gr60 0.21 0.23 0.23 0.25 0.6-0.9 0.80-1.20 0.13-0.45 0.035 0.035
A516 Gr65 0.24 0.26 0.26 0.28 0.85-1.20 0.85-1.20 0.13-0.45 0.035 0.035
A516 Gr70 0.27 0.28 0.28 0.30 0.85-1.20 0.85-1.20 0.13-0.45 0.035 0.035

ASTM A516 Grade 70 Carbon Steel

ASTM A516 Grade 70 Carbon Steel,ASTM A516 Grade 65

Gnee steel supply high quality carbon steel plate for boiler and pressure vessel fabrication which is ideally suited to the high standards set by the oil, gas and petrochemical industry – this is why we stock an extensive range of carbon plates according to ASTM A516 Grade 70.

ASTM A516 Grade 70 is an excellent choice for service in lower than ambient temperature applications, has excellent notch toughness and is used in both pressure vessels and industrial boilers.

A516 Grade 70 offers greater tensile and yield strength when compared to ASTM A516 Grade 65 and can operate in even lower temperature service.

Our plates come with mill certification in accordance with EN10204 3.1 or EN10204 3.2. Our plates are fully traceable, usually with hard stamping and we welcome any third party or customer inspection if required which can be arranged with the client.

Mechanical Properties of ASTM A516 Grade 65

Description Grade 65
Tensile strength (ksi) 70-90
Tensile strength (MPa) 485-620
Yield strength (ksi) 38
Yield strength (MPa) 260
Elongation in 200mm (min)(%) 17
Elongation in 50mm (min) (%) 21
Thickness (max)(mm) 205